Charging Battery - SoftBank 944SH User Manual

Charging Battery

1

Charging Battery

Battery must be inserted in handset to
charge it.
Charging Battery Outside Japan
. SoftBank Mobile is not liable for problems
resulting from charging battery abroad.
Desktop Holder
Together with Desktop Holder, use specified
AC Charger ZTDAA1 (sold separately) only.
. In this guide, ZTDAA1 is referred to as "AC
Charger."
. AC Charger and Desktop Holder are not
waterproofed or dustproofed. Do not
charge battery while handset is wet.
. Handset and AC Charger may warm while
charging.
Important AC Charger Usage Note
. Fold back blades after charging. Do not
pull, bend or twist the cord.
Important Desktop Holder Usage Notes
. Do not subject to force/pressure.
. Do not attempt to open handset.
4
1-
Connector
Release
Port
Tabs
Small Light
Arrows
AC Charger
Charger Connector
1
Insert Charger Connector
into Desktop Holder
. With arrows up, insert connector until
it clicks.
2
Extend blades
and plug AC
Charger into AC
outlet
3
Place handset onto Desktop
Holder
. Small Light illuminates red while
charging.
. Small Light goes out when battery is
full.
AC 100V Outlet
4
Disconnect 944SH from
Desktop Holder
5
Blades
Unplug AC Charger
. Squeeze Charger Connector release
tabs and pull straight out to remove.
When Small Light Flashes
. Battery is unchargeable; may be defective
or simply at the end of its life; replace it.
Desktop Holder Materials
. Desktop Holder includes a part
containing plant-derived resin, a new
eco-friendly material which is expected to
reduce CO
2
the entire product life cycle compared to
conventional petroleum resin.
emissions and oil usage in