Related Manuals for Pyle Pro PTCDS5U Vintage
Summary of Contents for Pyle Pro PTCDS5U Vintage
- Page 1 Vintage Turntable With CD / Cassette / Radio / Aux-In / USB / SD / MP3 and Vinyl-to-MP3 Encoding PTCDS5U INSTRUCTION MANUAL...
-
Page 2: Location Of Controls
LOCATION OF CONTROLS 1) DIAL POINTER 2) LCD DISPLAY 3) FUNCTIONS SWTICH 4) POWER LED INDICATOR 5) POWER ON/OFF, VOLUME UP/DOWN KNOB 6) MP3 FOLDER UP BUTTON 7) SOURCE BUTTON 8) EXTRA BASS ON/OFF BUTTON 9) RECORD BUTTON 10) CD DOOR 11) SD/MMC CARD SLOT 12) RADIO BAND SELECTOR SWTICH 13) FM STEREO LED INDICATOR... -
Page 3: Listening To Radio
LISTENING TO RADIO MANUAL TUNING 1. SELECT THE DESIRED BAND BY RADIO BAND SELECTOR (12) (AM OR FM OR FM-STEREO). 2. TUNE TO THE REQUIRED STATION BY TURNING THE TUNING KNOB (14). 3. ADJUST VOLUME KNOB (5) TO THE DESIRE VOLUME LEVEL. FM &... -
Page 4: Intro Play
REMARK:- - IN THAT CASE OF NO NAME HAD BEEN ASSIGNED FOR THE TRACK, “ NONE “ OR “ UNKNOWN “ IS BEING DISPLAYED” ON LCD DISPLAY (2). - THE SYSTEM SUPPORT ENGLISH ALPHABET AND NUMERAL ONLY FOR ID3 TEXT MP3/WMA TRACK FORMAT REQUIREMENT:- MP3 BIT RATE : 32 KBPS~256 KBPS AND WMA BIT RATE : 32 KBPS ~ 320 KBPS THE PERFORMANCE OF PLAYING MP3 DISC IS VARIOUS FROM THE QUALITY OF RECORDING DISC AND... - Page 5 IT WILL INDICATE PROGRAM NO. AND DIGITS FOR TRACK NO. TO BE PROGRAMMED. SELECT A DESIRED TRACK BY PRESSING SKIP BUTTONS (16,17). PRESS THE “ PROGRAM ” BUTTON TO STORE THE TRACE INTO MEMORY. REPEAT STEPS 3 AND 4 TO ENTER ADDITIONAL TRACKS INTO THE MEMORY IF NECESSARY. WHEN ALL THE DESIRED TRACKS HAVE BEEN PROGRAMMED, PRESS CD “...
-
Page 6: Line Out Connection
REMARK MAKE SURE THE DIRECTION IS CORRECT WHEN INSERTING THE TAPE INTO THE SYSTEM. THERE IS SOME SEARCHING NOISE CAN BE HEARD AND THE SYSTEM CANNOT PERFORM NORMAL PLAYBACK FUNCTION DURING FAST FORWARD MODE. THIS IS RECOMMENDED TO TAKE OUT THE CASSETTE TAPE FROM THE SYSTEM EVERY TIMES AFTER LISTENING AND DON’T LEAVE THE CASSETTE TAPE INSIDE THE SYSTEM WHEN NOT UNDER PLAYBACK MODE. - Page 7 PRESS THE “ RECORD “ BUTTON (3) AND THE UNIT WILL DISPLAY “ “ & “ “ & FLASHING. ENCODING IS PERFORMING NOW. AFTER COMPLETING OF ENCODING, UNIT WILL STOP PLAYBACK AUTOMATICALLY. REMARK:- INSERT EITHER ONE TYPE OF MEMORY MEDIA (USB PEN DRIVE OR SD/MMC CARD) TO THE UNIT FOR ENCODING PROCESS FROM CD/PHONO/TAPE RESPECTIVELY.
- Page 8 AFTER READING OF CARD INFORMATION IS COMPLETED, PRESS THE “ RECORD “ BUTTON (9) AND THE UNIT WILL DISPLAY “ “ & “ “ AND FLASHING. COPYING IS PERFORMING NOW. AFTER COPYING IS COMPLTED, UNIT WILL STOP AUTOMATICALLY. E) ENCODING BITRATE (BY REMOTE HANDSET) YOU CAN SELECT THE DESIRED BITRATE DURING ENCODING, THE HIGHER BIT RATE WILL GENERATE BETTER SOUND QUALITY AND OCCUPY MORE SPACE OF MEMORY.
-
Page 9: Button Description
X-BASS SOUND EFFECT PRESS THE X-BASS BUTTON (8) TO ACTIVE X-BASS FUNCTION AND EHNANCE THE BASS EFFECT AT “ ON “ POSTION. REMOTE CONTROL TRANSMITTER BATTERY INSTALLATION (BATTERY NOT PROVIDED) THE INFRA-RED TRANSMITTER REQUIRES 2 PC AAA SIZE BATTERY FOR OPERATION BUTTON DESCRIPTION 1) FIND IN MP3/WMA PLAYBACK, PRESS TO ACTIVE FILE/FOLDER NAME SEARCH... - Page 10 8) STOP IN SD/USB MODE, PRESS TO STOP PLAYBACK OR CANCEL THE STORED PROGRAM. 9) FOLDER UP /DOWN IN SD/USB MODE, PRESS TO SELECT FOLDER UP OR DOWN 10) SOURCE IN SD/USB MODE, PRESS TO SELECT SD OR USB MODE REPEATLY (TRACK SEPARATION) PRESS TO DIVIDE THE RECORDING TRACK AT TURNTABLE OR TAPE ONE BY ONE DURING ENCODING...