Subscribe to Our Youtube Channel
Related Manuals for Pyle Pro PYLEPRO VINTAGE PVNTT6UM
Summary of Contents for Pyle Pro PYLEPRO VINTAGE PVNTT6UM
- Page 1 Vintage Style Phonograph/Turntable With USB Connection Entertainment Center MODEL PVNTT6UM Operating Instructions Manual...
-
Page 2: Important Safety Instructions
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT USE THIS PLUG WITH AN EXTENSION CORD, RECEPTACLE OR OTHER OUTLET UNLESS THE BLADES CAN BE FULLY INSERTED TO PREVENT BLADE EXPOSURE. TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. IMPORTANT SAFETY INSTRUCTIONS Read these instructions. -
Page 3: Preparation For Use
Raise the lid to expose the phonograph. The phonograph has been secured for shipment with a transit screw. Use a coin or screwdriver to turn the transit screw clockwise . This will allow the turntable to float . TRANSIT SCREW... -
Page 4: Power Source
Remove the opaque white plastic stylus cover from the phonograph stylus by sliding it in the direction of the arrow. Discard the stylus cover. Remove the twist-tie that was used to secure the tone arm during shipment. Release the tone arm lock lever. Connect the plug to your AC outlet. -
Page 5: Front Panel
FRONT PANEL PHONOGRAPH LID 2) TURNTABLE TONE ARM PC-USB SLOT PH-AUX SWITCH AUX IN SOCKET(L/R) LINE OUT SOCKET(L/R) 8) AC POWER LINE PLUG... -
Page 6: Aux In Operation
PHONOGRAPH 1) Turntable. 2) 45 RPM Adapter. 3) Transit Screw. 4) Cue Lever. 5) Speed Selector (33 &45 &78 RPM). 6) Tone Arm Lock. 7) Tone Arm with Stylus. AUX IN OPERATION 1) Set the PH-AUX switch to AUX positon. Rotate the volume control to desert level. - Page 7 Tone Arm Lock that secured the tone arm to the tone arm rest. Set the turntable Speed Selector to the appropriate speed, 33, 45, or 78 RPM. If you are playing 45 RPM singles , place the 45 RPM adapter on the centre spindle.
- Page 8 AUX IN/PHONO RECORDING 、 Set the PH-AUX switch to PH or AUX in position, playback the tacks on the AUX or PHONO. 、 Install Audacity using the included disc. 、 3 Set the computer before record: 1) Set the volume control YES and then adjust the volume to max..
- Page 9 Audacity and USB Connection It supports Window 95 / with the EMS memory more than 128MB and Audacity takes space of 5MB. INSTRUCTION FOR PC RECORDING 1. Software installation 1.1) Insert the CD disk into drive of PC,and read it; 1.2) Open the software, double press the file Audacity exe then press next to go forward 1.3) Choose I accept the agreement, and press”NEXT”to go forward;...
- Page 10 “ ” 1.4) Press next to go forward; 1.5)Choose the desitination location, and press to go forward;...
- Page 11 “ ” 1.6) Press next to go forward; “ ” 1.7) Waitting for installation finished, and press finish to end the installation; 1.8)Choose the language as user’s need;...
- Page 12 2. Recording: 2.1) Open the software; “ ” “ ” 2.2) Choose Edit menu,then choose Preferences ; 2.3.Audacity Preferences...
- Page 13 NOTE: you need to check your computer audio properties,the “ sound recording should be selected sss usb Audio Device” as below. 2.4. Adjust the output and input volume. Output Volume Input Volume 2.5.Select the record button • to record the disc, the left and right tracks will show on the interface;...
- Page 14 2.5.1 Press this button •,start recording. 2.5.2 Click the 2.5.3 Click the 2.5.4 Click the 2.5.5 Click the 2.5.6 Click the 3. Export the Music Files for WAV,MP3,Format. • Once you have finished recording, you should save your music to the computer.
- Page 15 3.3) After opened, it will come to the following menu, click"YES" to go to "Llame-enc. dll", and find the file"s Iocation. 3.4)After you find the"lame-enc.dl"file,open it and dick "Y" to finish the installation.
- Page 16 To fix the turntable back onto the phonograph mechanism, make sure the column point is positioned over the correct place on the phonograph mechanism, while placing the axis of the turntable in the hole on the phonograph mechanism, as shown in the diagram. S T E P 4 Gently turn the turntable until a ‘pop’...
Need help?
Do you have a question about the PYLEPRO VINTAGE PVNTT6UM and is the answer not in the manual?
Questions and answers