ZyXEL Communications ZyWALL 2 Compact Manual page 13

ZyWALL 2
Point-to-Point Protocol over
Ethernet (PPPoE) functions as a
dial-up connection. Therefore you'll
also need a username and
password and possibly the PPPoE
service name. Your ISP will give
you all needed information.
Select Nailed Up Connection if
you do not want the connection to
the PPPoE server to time out.
Otherwise, enter the number of
seconds to elapse before the
ZyWALL disconnects from the
server in the Idle Timeout field.
The default value is 100 seconds.
Enter "0" to prevent the connection
from timing out.
Click Next to continue.
Choose PPTP if your service
provider uses a DSL terminator
with PPTP login. The ZyWALL
must have a static IP address (My
IP Address) in this case, and
possibly a subnet mask (My IP
Subnet Mask) if provided by your
ISP.
You'll also need a username,
associated password, and the DSL
terminator IP address (Server IP
Address). If your ISP has provided
a connection ID name, enter it in
the Connection ID/Name field.
See the PPPoE encapsulation
above for information on the
Nailed Up Connection and Idle
Timeout fields.
Click Next to continue.
Step 3. Fill in the fields and click Finish to save and complete the wizard setup.
13