Using The Rotating Stand; Easy-To-Use Controls - Digi-Code DF-390 User Manual

Setting up the Digi-Frame™ for the first time:
DF-390 is designed to be used either horizontally (landscape) or vertically
(portrait). The Digi-Frame™ will automatically change the display mode to
match its orientation.
Choose the orientation that you prefer, then rotate the Rotating Stand to
match that orientation. Set the DF-390 on a flat surface, and adjust the
height of the stand to change the viewing angle.
Make sure the Digi-Frame™ is off.
Connect the External Power Supply to the Power Supply jack on the back
of the Digi-Frame™. Be sure to match the arrow on the plug to the arrow
on the case before pressing the plug into the receptacle.
Plug the External Power Supply wall plug into a 110-240 VAC 50/60 Hz
supply. Charge the DF-390 for at least 10 hours before using battery
power only.
Insert a Compact Flash and/or SmartMedia™ Storage card with your digi-
tal pictures in J PEG format. Take care to orient the Cards as shown.
Move the Power Switch to the "On" position to turn on the Digi-Frame™.
Enjoy your pictures.

Using the Rotating Stand:

The stand on the back of your Digi-Frame™ rotates 90˚ and securely
clicks into two rotational positions, one for portrait, the other for land-
scape.
The stand is designed to support the Digi-Frame™ on flat surfaces. Be
sure that the stand is clicked securely into one of the two positions before
placing the Digi-Frame™ on a desk or other flat surface.
Both rotation positions can support the Digi-Frame™ at several viewing
angles, choose the one that looks best.
Orientation of the Digi-Frame™ may be changed at any time, the Digi-
Frame™ will automatically display your slideshow properly.
The Digi-Frame logo can be rotated to match the current orientation of
the Digi-Frame™.
8
Important information about the Screen:
The backlight of the display panel in your Digi-Frame™ has a minimum
life expectancy of at least 10,000 hours. This is equivalent to about 14
months of continuous 24-hour usage. To prolong the life of your Digi-
Frame's display we suggest turning it off when not in use. If used five
hours or less per day it will last at least five years.

Easy-to-use controls:

The icon-based menus on the Digi-Frame™ are controlled by a group of
three buttons and a wheel. Except for the Power Switch, all of the controls
are located on one side of the Digi-Frame™. It is the top in landscape
mode, and the right side in portrait mode.
The Menu Wheel:
Click the Menu Wheel at any time
to enter the control menu. From this
menu you can customize slideshows,
and take advantage of the many
features of the Digi-Frame™.
While in the menu system pressing (;) will exit any
menu and return to Slideshow mode.
The menu system is covered in greater detail in the
Digi-Frame™ Menu System chapter.
The Manual Control Buttons:
The three buttons between the wheels on the control
side of the Digi-Frame™ provide control of image
viewing.
Press the (;) button to pause or restart the
slideshow. When the show is paused, the play/pause
(;) resumes the slideshow.
Press the (4) button to advance to the next picture.
Press the (3) button to go back to the previous pic-
ture.
The buttons can have a variety of other functions
while in the menu system. Follow the onscreen direc-
tions.
The Contrast Wheel:
The Digi-Frame™ is easy to adjust for different ambi-
ent lighting conditions.
With the Digi-Frame™ in operation, rotate the contrast
wheel to create the optimum display setting.
9