Table of Contents
Advertisement
Auto Color Fill:
With Auto Color Fill On, your Digi-Frame™ will fill any unused portion of
the screen with a background color taken from the displayed image. This
reduces the "black bar" effect seen when pictures do not have the same
4:3 proportion as the Digi-Frame™ screen.
Slide Order:
You can choose to display the pictures in your slideshow either in the
order you selected in the Slideshow Setup screen, or in a random order.
Select "User-Defined Order" to show the pictures in sequence, or select
Random (Shuffle)" to display the pictures in a random order.
Note: Whichever setting you choose here, only pictures that you have
added to the currently selected slideshow will be displayed.
Time Between Slides:
You can select the amount of time between image changes, from one sec-
ond to ten minutes. The time increments by one second for every wheel
"beep" up to five seconds, then 5 seconds per "beep" up to 60 seconds,
after which it increments by 15 seconds per "beep".
The Time Between Slides defaults to 5 seconds.
Display Quality:
Select between Fastest, Medium, and Best. Fastest will be sufficient for
most images. If you notice a "blockiness" in your images, you might want
to try a higher quality setting.
Special Effect:
The Digi-Frame can display your Slideshow using any of a number of dif-
ferent and exciting special effects. The special effects do not change the
original digital picture on the memory storage card. Some of the special
effects supported are as follows.:
None:
This is the default setting. It displays all of the pictures as slides.
Black and White:
This displays all of the pictures in the slideshow as black & white pictures
Sepia Tone:
This displays all of the pictures in the slideshow as warm brown old-time photos.
Starlight:
This displays the pictures in the slideshow as if they were seen through light intensifier
goggles
Infra-red:
This displays the pictures in the slideshow to appear as if seen through an infra-red
camera.
Random:
A Special effect from the list above, is selected randomly for each picture in the
Sideshow.
18
Slideshow Setup:
The Slideshow Setup screen is where you select which of
the images stored on your memory cards are displayed in
the slideshow. The column of thumbnails on the left-hand
side of the screen represents all the images stored on the
currently-inserted memory card(s). The thumbnails on the
right-hand column represent the images currently included
in the slideshow. The images will be displayed in top to
bottom order during slideshow playback.
To add an image on a memory card to the slideshow:
Press the (3) button.
Highlight a thumbnail on the left-hand column (scroll down or up to
see more if they aren't all on the screen at once).
Click the wheel to add the selected image to the Slideshow.
The picture will appear above the highlighted image in the right col-
umn. The default position is the first in the slideshow; This can be
changed, see the next section.
A picture may be added to the Slideshow more than once.
To insert an image to a specific location in the slideshow:
Press the (4) button.
In the right hand column, find the space in the slideshow that you
want the picture to appear.
Use the Menu Wheel to select the picture before which you want the
new picture to appear.
Follow the directions above, "To insert an image in the slide show."
19
Advertisement
Table of Contents
