Warnings; Getting Started; Using Your Digital Camera With Digi-Frame; Contents - Digi-Code DF-390 User Manual

Table of Contents

Advertisement

WARNINGS!

!
Do Not Block the Ventilation Holes on the back of the
Digi-Frame™ at any time.
WARNING! USE ONLY RECHARGEABLE NiMH BAT-
TERIES. USE OF ANY OTH ER TYPE OF BATTERY
MAY CAUSE EXPLOSION, FIRE, OR PERSONAL
INJURY. DIGI-FRAME INC. IS NOT LIABLE FOR
LOSS OR DAMAGES RESULTING FROM USE OF
NON-RECOMMENDED BATTERIES.
Keep your Digi-Frame™ out of direct sunlight. Direct
sunlight may cause damage.
Always use the eject buttons on the memory storage
card slots to remove the memory storage cards.
Do not open the case of the Digi-Frame™. There is risk
of electric shock, and there are no user-serviceable
parts inside. Opening the case will void your warranty.
Do not use Digi-Frame™ if conditions could allow
condensation to occur, or damage may result.
The screen on the Digi-Frame™ is made of glass and
can break. It is covered with plastic polarizing material
that can be scratched. Treat it gently, and follow the
screen care instructions in this Manual.
The orientation sensor will rattle if the Digi-Frame™ is
shaken. This is normal.
If no storage card is inserted into the Digi-Frame™, It
will enter Self-Demonstration mode after a brief pause.
WARNINGS!
!
6
!
Unpacking your Digi-Frame™:
The DF-390 includes:
o
Digi-Frame™ Electronic Digital Picture Frame
o
Executive carrying case
o
External power supply, 100-240 VAC, 50/60 Hz
o
Macintosh®/PC-compatible serial cable (Digi-Link™ cable)
o
Digi-Link™ Macintosh®/PC compatible software on CD-ROM
o
Quickstart Card
o
User Manual
Make sure all of these parts are included before continuing.
If something is missing contact customer service: 1-800-771-5476

Using your Digital Camera with Digi-Frame:

MOST IMPORTANT:
The digi-frame can only read JPEG images.
Most cameras default to JPEG images.
If your camera has a choice of formats choose JPEG.
If you have images in some other format that you wish to display
on the Digi-Frame, use an image editing software to change the
format of the image to JPEG. DO NOT just change the tag at the
end of the file name to: <your picture>.jpg
Set your camera for lowest resolution.
The low resolution setting on your camera will display beautifully
on the Digi-frame. Higher resolutions will not improve display on
the digi-frame, and may slow down the slideshow.
It is possible that the Memory Card is not in a standard format.
Occasionally, memory cards included with digital cameras are fac-
tory formatted in some non-standard way. A badly formatted card
can cause a variety of problems in a Digi-frame. If an individual
card is having problems in the Digi-Frame, try reformatting the
card. Formatting erases the contents of the card, so be sure to
save any images to another storage media or device before refor-
!
matting!

Getting Started

7

Advertisement

Table of Contents
loading

Table of Contents