Page E3
Deliberately omitting a
zone when leaving the
building
OMIT ZONE?
At some time you may wish to
isolate a detector if a room is
occupied.
Enter your PIN code or Tag.
While the exit tone is sounding
press the 'YES' key.
When the 'OMIT ZONE' menu is
displayed
Key in the number of the zone you
wish to omit and press 'YES'.
(Always use a leading zero, eg 02 is zone 2.
On larger systems 002 is zone 2)
If it has been accepted it will be
displayed on the screen.
Repeat for any other zones that
need to be omitted.
After 10 seconds Euro-MERiDIAN
will begin to set
These zones will be omitted
for this one period only.