Flexi-Set; If Entry Timer Has Started; If Entry Timer Is Not Running - Castle Care-Tech Euro-MERiDIAN User Instructions

MERiDIAN
TIME:

Flexi-Set

When Euro-MERiDIAN is already set
and you wish to unset:
Key in your PIN code or present
your Tag.

If entry timer has started:

All areas for which the tag or PIN is valid
will be Unset. Any areas set for which the
code is not valid will remain set, eg if A
and B are set:
If an 'A' tag is presented, only area A will
be unset.
If an 'A B' tag is presented, both A & B will
be unset.
An 'A B C' tag will unset A & B, leaving C
unset.

If entry timer is not running:

You will be asked if you wish to set any
areas currently not set. Press 'YES' to do
so, or press 'NO' to unset the system.
If there are NO areas set for which the
code is valid, the system will SET as
described on page D2.
Note: Your alarm installing company may have
programmed keypads to set and unset certain
areas only.
Page D3