Castle Care-Tech Euro-MERiDIAN User Instructions

Castle care-tech euro-meridian alarm system

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

Enlarged version

You've Made the Right

Choice

Introduction

Using Euro-MERiDIAN with Code or Tag

Intelligent Setting

When Problems Arise

Setting Individual Area

Chime Facility

Omitting Zones

Keypad Personal Attack

Manager Menu

Omitting 24 hr Zones

Changing Date & Time

Change/Add Codes or Tags

Review History Log

SMS Phonebook

Walk Testing Detectors

Testing your Sounder

SMS Messaging System

Dial Out Menu

Allow Engineer Menu

Block Remote Set

Perform Anti-Code Reset

Service & Codeholder Records

Note the specification of Euro-MERiDIAN may vary

between models, and some facilities in the manual

may not be available. Check with your installer for full

details. This equipment may be used in systems

installed to a lower grade, which will be agreed with

your installation company.

Page A1

A1-4

B1-5

B6-7

C1-3

D1-3

E2-3

F1-2

F5-10

F11-12

F13

F14

F15

F16-17

F18

F19

F20

F21

G1-2

Table of Contents

Need help?

Do you have a question about the Euro-MERiDIAN and is the answer not in the manual?

Questions and answers

Summary of Contents for Castle Care-Tech Euro-MERiDIAN

Page 1 Perform Anti-Code Reset Service & Codeholder Records G1-2 Note the specification of Euro-MERiDIAN may vary between models, and some facilities in the manual may not be available. Check with your installer for full details. This equipment may be used in systems installed to a lower grade, which will be agreed with your installation company.
Page 2 Page A2 You’ve Made the Right Choice Using your Euro-MERiDIAN Alarm System just couldn’t be easier! This is the Keypad from where you control your Alarm System. Note: your security, keypad becomes disabled for 90 seconds after 24 incorrect key- presses, or after 6 attempts to present invalid tags.
Page 3 Page A3 The MERiDIAN Keypad display gives MAINS FAIL important messages. It will alert you if you need to call your alarm installation engineer. The 10 digit numeric keypad is where you use your PIN code. MERiDIAN The A B C D keys help simplify use, TIME: and will illuminate to highlight your choice of security cover, or...
Page 4 Page A4 Warning Indications All setting points (Keypads or Tag Alert Readers) have lamps clearly Alarm indicate what is happening. Tamper The ‘Alert’ lamp will flash if there is Fault information available to you. Enter Unset your code to see the information. After a code has been entered, one of the following lamps will light: Alarm, Alert...
Page 5 Page A5 Using Tags Euro-MERiDIAN’s High Security Proximity Tag (or Card) will set or unset your Alarm system with the minimum of fuss or complexity. The Tag contains NO batteries and is completely maintenance free. Just touch the Tag to the logo to use.
Page 6 Using the Keypad with your PIN Code or...
Page 7 Page B1 Security Checks Before you set your system: You must ensure all doors and windows are securely closed and any pets or people are excluded from areas protected movement sensors. Close Windows Close Doors Exclude Pets & People...
Page 8 (if fitted) that is mounted screen. externally by the final exit door. If you use a Push-to-Set button, or final-door- Exit tone will cease set, you will see the screen below. Leave via desig route Euro-MERiDIAN is now SET...
Page 9 Page B3 Faults when you Switch On Alert If when you key in your PIN code Alarm (or present your Tag) a warning Tamper tone sounds and the fault lamp Fault comes on. The keypad display Unset will show the nature of the problem.
Page 10 Page B4 Faults when Leaving the Building If when you have closed the final exit door (and pushed the ‘Push to Set’ button if fitted), the exit tone continues sound interrupted tone… “beep – beep – beep – “ have probably left protected door on the exit route...
Page 11 “beep – beep – beep –“ Key in your PIN code, or present ENTRY [010] your Tag. TIME Entry tone will cease To indicate that the system has Alert unset, unset lamp will Alarm illuminate for five seconds. Tamper Fault Unset Euro-MERiDIAN is now UNSET...
Page 12 Page B6 Part-Setting the System Intelligent Set (if programmed) If you wish to set Euro-MERiDIAN and stay in the building (eg set the alarm at night), the Euro- MERiDIAN’s intelligent operating system will realise which level of security you require and will set only part of the system.
Page 13 Page B7 Staying in the Building Intelligent Set To Part Set Euro-MERiDIAN go to the keypad and enter your PIN code or present your Tag. The appropriate A B C D keys will illuminate Exit tone will start Leave the protected area and retire to the un-protected area (eg upstairs).
Page 14 When Problems Arise, Just Key in your PIN Code or...
Page 15: Silencing Alarms
The Alarm will stop sounding display will indicate problem. Alarm Silence LOW VOLTS Press the ‘YES’ Key Euro-MERiDIAN will advise you on Alarm Silence any action that is needed. If the LOW VOLTS ‘Alert’ LED indication remains lit, there is additional information available. Enter your present your Tag to view.
Page 16 You will be required to quote a 5-digit code by telephone (advise them that the system is a Castle Euro-MERiDIAN). You will then be given a special code which will reset the system for that one occasion only.
Page 17 Page C3 Automatic Inhibit Euro-MERiDIAN designed automatically disable certain functionality. The factory default settings are as shown below: Intruder After unconfirmed Alarm Signal alarms in the same area or 1 confirmed alarm. Tamper After unconfirmed Alarm Signal alarms in the same area or 1 confirmed alarm.
Page 18 Setting Individual Areas...
Page 19 Page D1 The A B C D Keys Sometimes your security needs MERiDIAN TIME: will be a little more complex and you will need to use the A B C D keys. Your Installer also give names to all four of the A B C D areas, so that you can easily identify them.
Page 20 Page D2 Codes with Flexi-Set For greater flexibility in setting SET AREAS parts of your system, you can [ABCD] make a choice at the keypad. Key in your PIN code or present your Tag. If you do not wish to set all the areas assigned to your code/Tag, simply select the areas you wish to pressing...
Page 21 Page D3 Flexi-Set When Euro-MERiDIAN is already set MERiDIAN and you wish to unset: TIME: Key in your PIN code or present your Tag. If entry timer has started: All areas for which the tag or PIN is valid will be Unset. Any areas set for which the...
Page 22 Page D4 Flexi-Unset If your codes have been set up with Flexi-Unset enabled, you will always have a choice of what areas you would like to set or unset, regardless of whether the entry timer is running or not – providing you have a code valid for the relevant areas.
Page 23 Page D3 This Page has been left Flexi-Set Blank for Notes...
Page 24 More Advanced Functions...
Page 25 Page E1 The ‘Chime’ Facility The ‘C’ key can be used to select MERiDIAN ‘chime’ facility while TIME: system is Unset. For example, you may wish to be alerted if someone enters through a particular door during the day. Simply press the ‘C’ key. MERiDIAN The display will show a ‘C’...
Page 26 Page E2 Setting with a Fault In a domestic setting you may wish to ignore window have deliberately left open in the summer time. There may be another fault on the system which you want to ignore when you set the system. Enter your PIN code or present your Tag.
Page 27 If it has been accepted it will be displayed on the screen. Repeat for any other zones that need to be omitted. After 10 seconds Euro-MERiDIAN will begin to set These zones will be omitted for this one period only.
Page 28 Page E4 Keypad Personal Attack If you ever need to summon personal assistance MERiDIAN emergency, Euro-MERiDIAN allows TIME: you to do so. Simply press the ‘1’ and ‘7’ keys at the same time. To reset: Enter you PIN code or present your Tag.
Page 29 This Page has been left Blank for Notes...
Page 30 Page E4 Keypad Personal Attack Manager Menu enter Manager Menu, press ‘D’ and then key in your code or present your tag. The screen will display relevant information; simply press ‘No’ to move into Manager Menu. We recommend that your system is be fully disarmed Manager Menu...
Page 31: Manager Menu
Page F1 Manager Menu The manager menu is accessed by MERiDIAN pressing ‘D’ and then keying in your TIME: Manager PIN code. You then have a choice of: Set Date & Time? Omit Inputs? Change Code(s)? * Review Logs? * Phone Book? Walk Test? * SIREN TEST?
Page 32 Page F2 Manager Menu Press ‘D’ and key in your Manager PIN code or user code. The first Menu choice asks you if you wish to ‘Set Date & Time?’ SET DATE & TIME? If you wish to enter the menu, press ‘YES’.
Page 33 Page F3 Set Date & Time Press ‘NO’ to move to next menu. SET DATE & TIME? Press ‘YES’ ‘NO’ (Press to move to the next menu) Enter Year (eg 01=2001) YEAR (00-99) [02] Press ‘YES’ Enter Month MONTH (1-12) [08] Press ‘YES’...
Page 34: Omit Zones
Page F4 Omit Zones Some of your doors may rarely be used. Opening them, even with Omit Zones[--] Euro-MERiDIAN Unset, designed to cause an alarm. If you need to open these doors you can omit them from the system as shown below.
Page 35 Page F5 Changing or adding PIN Codes/Tags A record should be kept as shown on Page G2 CHANGE CODES? Press ‘YES’ (Press ‘NO’ to move to the next Menu) Press ‘YES’ Change User Master (Press ‘NO’ to programme the Codes? Manager Code Turn to the next page to continue to programme user codes.
Page 36 ENTER USER To delete a code or Tag press ‘C’. CODE [7024] Press ‘YES’ Euro-MERiDIAN will not allow you to programme in codes that are already in use by the system. Note: ‘EN Grade 3’ Standard users can only edit their...
Page 37 Page F7 Changing or adding PIN Codes/Tags Choose the level of authority the code-holder is allowed. User – cannot access Manager Menu. User Type (User) Manager – can use Manager Menu. (Use ‘B & D’ keys to make your choice). Press ‘YES’...
Page 38 Page F8 Changing or adding PIN codes/TAGS Flexi-Set gives you the opportunity to choose the areas you require to Flexi Set set when you use your PIN code or Tag. If you do not choose Flexi-Set your Code/Tag will simply set the areas Flexi Set assigned without offering you the opportunity to choose.
Page 39 Page F9 Changing or adding PIN Codes/Tags If you do not have Access Control or Wards, go to page F10. Assign Codes Press ‘YES’ to Readers (Press ‘NO’ to move to next menu) To assign a Tag to Access Control WARDS ACCESS Readers, or a Ward Reader Enter...
Page 40 Page F10 Changing or adding new PIN Codes/Tags Using the numeric keys, you can ,/+.1 abc2 def3 enter a user name, similar to typing a text message on a mobile ghi4 jkl5 mno6 phone. pqrs7 tuv8 wxyz9 The A B C D keys on the keypad are used as follows: ‘A’...
Page 41: Review History Log
Page F11 Review History Log Press ‘YES’ REVIEW LOG? (Press ‘NO’ to move to the next menu) Press ‘YES’ Panel Log? To advance through the logs: Date & Time Press ‘D’ EVENT For added information: Press ‘C’ Area Involved User Involved To move backward to previous events: Press ‘B’...
Page 42 Page F12 Review History Log If Access Control Facility is in use, a separate log is available dedicated to events using this function. Follow the same procedure as described on page F11, but press ‘NO’ to choose between ‘PANEL LOG’ and ‘ACCESS LOG’.
Page 43 Page F13 SMS Phone Book Press ‘YES’ PHONEBOOK? (Press ‘NO’ to move to the next Menu) Use the ‘D’ key to scroll to which SMS Numbers SMS telephone number you wish to change (1-4). Press ‘YES’ Using the numeric keys, type in Mobile No.
Page 44: Walk Test
Page F14 Walk Test Press ‘YES’ WALK TEST? (Press ‘NO’ to move to the next Menu) Choose the area(s) you wish to test by pressing the appropriate ABCD keys. Walk Test Zone Press ‘YES’ Front Door All detectors waiting to be tested will scroll in the display.
Page 45 Page F15 Testing your Alarm Sounders SIREN TEST? Press ‘YES’ (Press ‘NO’ to move to the next menu) Testing Siren Press ‘YES’ Siren will sound, Strobe will flash Press ‘NO’ to move to next menu. SIREN TEST?
Page 46 The fee for routine checking is collected automatically via a premium rate number when the Euro-MERiDIAN makes its regular authorisation and routing call to the messaging computer. Should this call fail, the display will show ‘CHC Test Fail’...
Page 47 Page F17 Test CHC Communications It is recommended that this test is only undertaken under supervision your alarm installation engineer. Press ‘NO’ to move to the next menu TEST CHC (Press ‘YES’ to make the test (under the COMMUNICATIONS? direction of an alarm engineer), the test call will be via a premium rate number)
Page 48: Dial Out Menu
Page F18 Dial Out Menu Your alarm system configured so that you can control Dial Out Menu? the system via a PC. If you wish to continue… Press ‘YES’ (Press ‘NO’ to move to the next menu) Use the ‘D’ key to select the Select PC to required PC from the list (1-4) and dial...
Page 49: Allow Engineer Menu
Page F19 Page F21 Block Up/download Allow Engineer Menu When your alarm installation engineer comes to your premises ALLOW ENGINEER for the annual maintenance visit MENU? or correct a fault after an alarm he will require access programming of the system. Press ‘YES’...
Page 50: Block Remote Set
Page F20 Block Remote set Your alarm system configured so that your alarm Block Remote installation company or company Set? manager can set or unset the system remotely via PC. Should you wish to block this access you can do so through this menu. Press ‘YES’...
Page 51 You will be required to quote this 5-digit code by telephone Eng Restore (advise them that the system is a Reqd 19113 Castle Euro-MERiDIAN). You will then be given a special code which will reset the system for that one occasion only. Press ‘YES’...
Page 52 Page F22 User Programmable Functions Persons holding Manager codes to Euro-MERiDIAN have access to the following programming options: Set Date & Time (page F2) Change User Codes (page F5) Change Mobile Telephone Numbers (page F13) Allow Engineer Access (page F19)
Page 53 Page F23 Menu Exit To exit from Manager Menu and return to normal mode. EXIT MANAGER MENU? Press ‘YES’ If you wish to select any of the Manager Menu items again press the ‘NO’ key until your choice is displayed (see F2).
Page 54: Service Information
Page G1 Service Information We are sure that you will be delighted with your Euro-MERiDIAN Alarm installation. For your personal reference here is a record of the relevant service information. Service Company Date of Installation Month Year Site Reference 24hr Service Number...
Page 55: User Codes
Page G2 User Codes Warning: This information should be removed from the manual and stored in a secure location. Photocopy this page if you have more users. Access Name Type Areas Attributes FlexiSet Reader John Manager ABCD Set/Unset 1 2 8...
Page 56 Page G3 Disclaimer Euro-MERiDIAN includes the facility to send electronic signals to an Alarm Receiving Centre (ARC), and also to send SMS text messages to mobile telephones. Alarm, etc. signals may be transmitted via a PSTN link, using a variety of formats, to suitable receiving equipment located at the premises of an independently operated Alarm Receiving Centre.

Castle Care-Tech Euro-MERiDIAN User Instructions

Quick Links

Contents

Need help?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Castle Care-Tech Euro-MERiDIAN

Summary of Contents for Castle Care-Tech Euro-MERiDIAN

Table of Contents