GMC Savana 2011 Owner's Manual page 344

10-78 Vehicle Care
Removing the Flat Tire and
Installing the Spare Tire
If the vehicle has plastic wheel nut
caps, loosen them by turning the
wheel wrench counterclockwise.
The wheel nut caps are designed to
remain with the center cap. Remove
the center cap.
If the wheel has a smooth center
piece, place the chisel end of the
wheel wrench in the slot on the
wheel and gently pry it out.
1. Do a safety check before
proceeding. See If a Tire Goes
Flat on page 10 73 for more
information.
2. Loosen all the wheel nuts with
the wheel wrench. Do not
remove them yet.
3. Assemble the jack and tools:
Front Flat: Assemble the
jack (A) together with the jack
handle (B), one or two jack
handle extensions (D) and the
wheel wrench (E).
Rear Flat: Assemble the jack (A)
together with the jack handle (B),
two jack handle extensions (D),
and the wheel wrench (E).
I n f o r ma t i o n P r o v i d e d b y :
Front Position
Front Position