2. Use the
3. Use the
4. Do one of the following:
• To print a long ribbon with a repeated pattern (or multiple copies of the same label), press the
key and select Print copies.
• To print a single label, press the
5. To remove the labels or ribbon, cut it with scissors, or press the
Feed and cut.
Parent topic:
Feeding and Cutting the Tape
You can feed the tape to add length to a label or ribbon design. You can also feed and cut a label or
ribbon that has been printed without cutting.
1. Press the
2. Use the
• Tape feed
• Feed and cut
Parent topic:
Adjusting Print Density
If your labels are printing too dark or too light, you can adjust the print density.
1. Press the
2. Use the
3. Do one of the following:
• To make the print lighter, select one of the – settings.
• To make the print darker, select one of the + settings.
4. Try printing again to make sure the density is adjusted as desired.
Parent topic:
key to highlight Auto cut and press the
key to highlight Off and press the
button.
Printing Labels Using the Built-In Keyboard
key + the
button.
key to highlight one of the following settings and press the
Printing Labels Using the Built-In Keyboard
+
keys.
key to highlight Print density and press the
Printing Labels Using the Built-In Keyboard
key.
key.
key + the
key.
46
button and select
key: