Installing A Tape Cartridge - Epson LabelWorks LW-PX700 User Manual

2. Installing a tape cartridge

CAUTION
• Make sure that the power is turned off.
• You cannot use tape other than PX-tape.
• Make sure the top cover is closed firmly.
• If you opened the top cover while a tape cartridge is
installed, check that the tape end is put into the tape
eject slot before beginning operation.
• Take care to keep the label for detecting the tape
cartridge and the sensor of the printer clean.
Otherwise, tape may no longer be detected correctly.
• Do not touch the sensor directly with your fingers.
Label for detection
Sensor
1. Rewind the ink ribbon.
Use a pen
or a pencil.
2. Open the top cover.
Top cover
Start Here
3. Install a tape cartridge.
Put the tape end
into the tape eject
slot.
4. Close the top cover.
Top
Safety Instructions
Specifications
Troubleshooting
Part Names and
Functions
Start Here
Cleaning
Initializing the
Settings
Purpose-based Index
Key Menu Index
Frame and Table Lists
11