Manually Create Connection - Nokia N800 User Manual

5.
After successful pairing, the mobile operator setup
wizard is presented. Use it for saving your internet
connection settings. If you have already saved the
settings or plan to save them later from the
Control panel, tap Cancel. You can access the wizard
afterwards by tapping
Control panel. In the control panel, select
Tools > Mobile operator setup
6.
Tap Finish to save the settings.
Tip: Set your Nokia N800 as a trusted device from
the Bluetooth connectivity menu of your phone.
This way you allow your Nokia N800 to access your
phone, and you do not have to confirm the
connection every time you activate it. For more
information, refer to the user guide of your phone.
If you change the Bluetooth connectivity name of
your phone, it is not updated to your Nokia N800
automatically. To update the name, pair the Nokia
N800 with your phone again.

Manually create connection

To define mobile phone connections manually, tap
select Tools >Control panel >
New. The welcome page of the internet setup wizard is
and selecting Tools >
Control panel
wizard....
and
Connectivity > Connections
displayed. Tap Next to proceed to the
Connection setup: Name and type
1.
In the Connection setup: Name and type
the following settings:
Connection name—Enter a descriptive name for the
> connection.
Connection type:—Select the type of network service
over which you want to access the internet. To use a
packet-switched data service in a cellular network,
such as GPRS (network service), select
use a circuit-switched data service in a cellular
network, such as HSCSD (high-speed circuit-switched
data; network service), select
2. You must select the network manually if you have not
paired a compatible mobile phone with your device.
Select the type of cellular network over which the
internet connection takes place:
3.
In the connection setup dialog, define the following
settings:
Access point name—Enter the name of the internet
access point. Obtain the name from your internet
service provider. This setting is only shown if you
>
selected packet-switched data connection (such as
GPRS) and your phone uses a GSM cellular network.
dialog.
dialog, define
Packet data. To
Data call.
GSM/UMTS or CDMA.
© 2006 Nokia. All rights reserved.
24