Pair A Phone With Your Device; Create A Cellular Connection - Nokia 770 - 770 Internet Tablet User Manual

Pair a phone with your device

You must always start the pairing of devices from your Nokia 770
Internet Tablet. Although you can only use one phone at a time, you can
pair several phones with your device.
To pair a phone with your device, do the following:
1. Activate Bluetooth connection on your mobile phone.
2. Tap , and select
Select phone dialog opens, and your device begins to search for
compatible Bluetooth devices.
3. Select the desired phone from the list of found devices, and tap
Select. Your device generates a passcode.
4. In the Pair with phone
it with a passcode of your own. Tap OK, and enter the same passcode
on your phone.
5. Tap Finish to save the settings.
Tip: Set your Nokia 770 Internet Tablet as a trusted device from
the Bluetooth menu of your phone. This way you allow your
device to access your phone, and you do not have to confirm the
connection every time you activate it. For more information, refer
to the user guide of your phone.
If you change the Bluetooth name of your phone, it is not
updated to your device automatically. To update the name, pair
the device with your phone again.

Create a cellular connection

1. In the Connection setup: Name and type
settings:
Connection name
Connection type:
you want to access the Internet. To use a packet-switched data
service in a cellular network, such as GPRS (network service), select
Packet data. To use a circuit-switched data service in a cellular
Copyright © 2006 Nokia. All rights reserved.
D e f i n e I n t e r n e t c o n n e c t i o n s
Tools > Control panel
dialog, use the generated passcode or replace
— Enter a descriptive name for the connection.
— Select the type of network service over which
> Phone > New. The
dialog, define the following
23