Viewing Traffic Subscriptions; Adding A Subscription; Enabling Traffic; Vehicle And Driver Logs - Garmin dezl 570 Series Owner's Manual

Viewing Traffic Subscriptions

Select Settings > Traffic > Subscriptions.

Adding a Subscription

You can purchase traffic subscriptions for other regions or
countries.
1
From the main menu, select Traffic.
2
Select Subscriptions >
3
Write down the FM traffic receiver unit ID.
4
Go to www.garmin.com/fmtraffic
and get a 25-character code.
The traffic subscription code cannot be reused. You must
obtain a new code each time you renew your service. If you
own multiple FM traffic receivers, you must obtain a new
code for each receiver.
5
Select Next on the device.
6
Enter the code.
7
Select Done.

Enabling Traffic

You can enable or disable traffic data.
1
Select Settings > Traffic.
2
Select the Traffic check box.

Vehicle and Driver Logs

About IFTA Logging

NOTE: This feature is not available in all areas.
You can archive data needed for International Fuel Tax
Agreement documentation (IFTA), such as fuel-purchase data
and miles driven.
Before you can use IFTA logging, you must be in Truck mode.

Entering Fuel Data

1
Select Apps > IFTA Logging > At the Pump.
2
Enter the fuel price per gallon.
3
Select the Fuel Used field.
4
Enter the amount of fuel purchased.
5
If necessary, select an option:
• To record the amount in liters, select Gallons > Liters >
Save.
• To record the amount in gallons, select Liters > Gallons >
Save.
6
If necessary, select the Tax Included check box.
7
Select the gas station where you refueled.

Editing Fuel Logs

1
Select Apps > IFTA Logging > Fuel Logs.
2
If necessary, select a truck.
3
If necessary, select a quarter.
4
Select a log.
5
Select an option:
• Select a field to edit the information.
• Select > Yes to delete the log.

Viewing and Exporting a Jurisdiction Summary

The jurisdiction summary lists data for each state or province in
which your vehicle has operated during each quarter. The
jurisdiction summary is available in some areas.
1
Select Apps > IFTA Logging > Jurisdiction Summary.
2
If necessary, select a truck.
Vehicle and Driver Logs
.
to purchase a subscription
3
If necessary, select a quarter.
4
Select > Export > OK to export a jurisdiction summary.
The device exports the summary to a .csv file and stores it in
the Reports folder on the device.

Editing and Exporting Trip Reports

1 From the main menu, select Apps > IFTA Logging > Trip
Reports.
2 If necessary, select a truck.
3
If necessary, select a quarter.
4 Select a report.
5
Select an option:
• Select > Delete, and select the check box to delete a
report.
• Select > Combine, and select the check boxes to
combine reports.
• Select > Export > OK. The device exports the report to
a .csv file and stores it in the Reports folder on the
device.
Viewing Exported Jurisdiction Summaries and Trip
Reports
If you do not know the purpose of a file, do not delete it. Your
device memory contains important system files that should not
be deleted.
1
Connect the device to your computer.
2
Open the "Garmin" drive or volume, and open the Reports
folder.
3
Open the IFTA folder.
4
Open the .csv file.

About Hours of Service

Although this device is enabled to record hours-of-service
information, this device is NOT an approved substitute for paper
logbook recording requirements under Federal Motor Carrier
Safety Administration regulations. Drivers should comply with all
applicable federal and state paper logbook requirements.
NOTE: This feature is not available in all areas.
Before you can use Hours of Service, you must be in Truck
mode, and you must create a driver profile
You can use Hours of Service to record your working hours,
which may help you comply with safety regulations.

Recording Your Duty Status

1
Select Apps > Hours of Service.
2
Select a driver.
3
Select Duty Status.
4
Select an option:
• Select Off Duty to record the time you are off duty.
• Select Sleeper to record the time you are resting in a
sleeper berth.
• Select Driving to record the time you are driving a
commercial motor vehicle in operation.
• Select On Duty to record the time you are on duty, but not
driving a commercial motor vehicle.
• Select Passenger Seat to record the time a second driver
is in the passenger seat but is not on duty.
NOTE: A driver can be in passenger seat status for up to
two hours immediately after or before eight consecutive
hours in the sleeper berth.
NOTICE
NOTICE
(Adding Drivers).
11