Interrupt
1st DMA channel
2nd DMA channel
Security Menu
User Password Is
Administrator Password Is
Set User Password
Set Administrator Password
Boot
Resume*
Undock*
Internal Hard Disk Drive
Lock*
Floppy Boot
* Resume, Undock, and Internal Hard Disk Drive Lock options are available only if Boot option is
enabled.
Configuring the OmniBook with the BIOS Setup utility
Sets the interrupt.
Sets the DMA channel for playback.
Sets the DMA channel for recording.
Shows if a user password is set.
Shows if an administrator password is set.
Press ENTER to set, change, or clear user
password. Password length can be no longer than
8 characters, 0-9, A-Z.
Press ENTER to set, change, or clear administrator
password. This password protects BIOS Setup
settings.
Sets whether a user password is required when
the computer boots.
Sets whether a user password is required when
resuming from a suspended state.
Sets whether a user password is required when
undocking the OmniBook.
Encodes the current user password (or
administrator password if that is the only
password set), on the primary hard disk drive.
Sets whether the floppy drive is a boot device.
Introducing the OmniBook
IRQ5
DMA1
DMA0
Default
Clear
Clear
Enabled
Enabled
Disabled
Disabled
Enabled
1-13