Panasonic KX-TGD210 Operating Instructions Manual page 41

Caller ID/Talking Caller ID
Problem
Caller information is not
displayed.
Caller information is displayed
or announced late.
Caller information is not
announced.
The caller list/incoming phone
numbers are not edited
automatically.
I cannot dial the phone number
edited in the caller list.
Time on the unit has shifted.
For assistance, please visit http://www.panasonic.com/help
TGD2xx_(en_en)_1209_ver.040.pdf
Cause/solution
R You must subscribe to Caller ID service. Contact your
service provider/telephone company for details.
R If your unit is connected to any additional telephone
equipment such as a Caller ID box or cordless telephone
line jack, plug the unit directly into the wall jack.
R If you use a DSL/ADSL service, we recommend
connecting a DSL/ADSL filter between the base unit and
the telephone line jack. Contact your DSL/ADSL provider
for details.
R The name display service may not be available in some
areas. Contact your service provider/telephone company
for details.
R Other telephone equipment may be interfering with this
unit. Disconnect the other equipment and try again.
R Depending on your service provider/telephone company,
the unit may display or announce the caller's information
at the 2nd ring or later.
R Move closer to the base unit.
R The handset or base unit's ringer volume is turned off.
Adjust it (page 15, 22).
R The Talking Caller ID feature is turned off. Turn it on
(page 23).
R The number of rings for the answering system is set to "2
rings" or "Toll saver". Select a different setting
(page 33).
R If the base unit and another handset are having an
intercom call, your handset does not announce caller
information.
R The Caller ID number auto edit feature is turned off. Turn
it on and try again (page 23).
R You need to call back the edited number to activate Caller
ID number auto edit.
R The phone number you dialed might have been edited
incorrectly (for example, the long distance "1" or the area
code is missing). Edit the phone number with another
pattern (page 29).
R Incorrect time information from incoming Caller ID
changes the time. Set the time adjustment to "Manual"
(off) (page 23).
41
Useful Information
41
2013/12/09 10:59:20