Advertisement
3
Using Your Machine
How to Use:
Before first use, wash the Jar
Assembly in warm sudsy water,
rinse and dry well.Blending is
a very fast process.The motor
drives the cutter at high speed to
ensure that through blending is
achieved.Make sure that whenever
you use blender it is standing on
a flat, clean, dry surface.Before
starting to blend check that the jar
assembly is firmly in place on the
motor base.
Operation:
With the motor unit resting on a
flat dry surface and jar assembly
firmly sitting in place, put the foods
to be
blended into the jar.
Please note that the jar should be
locked on to the main unit by hold-
ing the washable blade assembly
not the jar handle.
•
Use the measuring scale on the
jar as a guide and, to avoid having
the food overflow, restrict the
quantity
to no more than 1500 ml. at any
one time.Place lid and lid insert on
jar assembly.
Attention
Do not operate the appliance con-
tiniously more than 30 seconds.
Do not operate the appliance
when empty.
•
Ensure the blender is switched
OFF "O" and plug power cord into
a power outlet.Turn blender switch
to either setting for a few seconds.
Switch OFF "O" and check the
food. Blending is a fast process.
Take care not to over blend.
•
Use the PULSE setting for
greater control in short blend-
ing jobs.Switch must be held in
PULSE position for blender to
run. Blender will stop as soon as
switch is released. Use the PULSE
setting to prevent over blending
of foods.
•
If you wish to add ingredients
whilst blending, liquids can be
added through the hole in the
lid insert, or the lid insert can be
removed to allow dry foods to be
added through the larger hole. DO
NOT operate the blender without
the lid and lid insert in place.
Figure 1
4
Figure 2
Advertisement
