Silvercrest URC 101 DT Operation And Safety Notes page 52

• If the memory is full, the message
appear. In this case delete some saved commands.
• The programming of each button can take about 3
seconds. Do not release the learn button before the
message
• The following buttons cannot be allocated functions:
setup (17), macro (15) and all source buttons (2).
• Some original remote controls (for DVD, Video
Recorder, Satellite) can themselves be programmed
with device codes of some makes of TV so basic
functions can be performed on the TV (volume, mute,
search through channels).
Please do not attempt to transfer the functions of an
original remote control to your universal remote control
if the original has been programmed with the code of
another TV. This could lead to errors during the
programming.
• First carry out a test where you program and test two
or three commands.
• Before you program in your commands, please delete
all previous commands on this source button.
Do not carry out the learn function directly underneath
energy saving lamps. Such lamps (e.g. fluorescent
lamps) can contain infra red light components which
could affect the learn function.
50
or
will
appears.