Silvercrest URC 101 DT Operation And Safety Notes page 20

Press the EXIT button (16) to go back to the
standard display.
Most buttons can be used for two functions. To access
the second function activate the shift function.
Prolonging battery life
Should a button accidentally remain pressed down (e.g.
because an object is lying on the remote control) the
remote control will send 350 infra red signals (this takes
about 30 seconds) and stops the transmission. This
prevents the batteries from being drained unnecessarily.
Display after pressing buttons
Every time a button is pressed the symbol
"transmitting" appears on the display
Settings after changing the batteries
When the batteries are correctly inserted the display is
switched on. It will show the active mode ("TV"), the day
of the week and the time.
TV Mode
When selecting the button there is no option to select
the type of device because the source button (2) can
only be programmed with TV codes.
18