Mercedes-Benz C-class Operator's Manual page 194

Express opening and closing
Press or pull switch past resistance point and release –
window opens or closes completely.
To interrupt procedure, briefly press or pull switch.
If the upward movement of the window is blocked
during the closing procedure, the window will stop
during the last few inches before closure and open
slightly.
When pulling and holding the switch to close the
window, and upward movement of the window is
blocked during the last few inches before closure, it will
stop but not open slightly.
Note:
The power windows can also be opened and closed
using the convenience opening/closing feature, see
page 29.
Interior equipment
Instruments
Operation
and controls
Instrument
Driving
cluster display
Warning!
When closing the windows, be sure that there is no
danger of anyone being harmed by the closing
procedure.
In case of obstruction, the automatic reversal will
not operate if a window is being closed by pulling
the switch to its resistance point and holding it
there, or when using the electronic main key.
The closing procedure can be immediately reversed
by either pressing or pulling the switch, or
pressing button Πon the electronic main key
and holding it.
When leaving the vehicle, always remove the
electronic key from starter switch, and lock your
vehicle. Do not leave children unattended in the
vehicle, or with access to an unlocked vehicle.
Unsupervised use of vehicle equipment can cause
serious personal injury.
185
Practical hints Car care
Technical
Index
data