Advertisement
Contents
Connections
o Sound is not output/sound is quiet
Symptom
Sound is not output/sound
0
is quiet.
0
0
0
0
0
0
o Sound is distorted, sound is interrupted
Symptom
Sound is distorted, sound
0
is interrupted.
0
Front panel
Side panel
Playback
Check that the proper input source is selected using the input source selection switch (INPUT).
Check that power to this unit and the connected devices is on.
Adjust to an appropriate volume level on this unit and the connected devices.
Check that the cables are properly connected.
The AUX input connector on this unit supports 3-pole stereo mini plugs. Be sure to use 3-pole stereo mini
plug cables.
If this unit is not recognized by the computer as a USB device, restart the computer.
Your headphones may not be set with the appropriate gain settings. Switch the gain selection switch
(GAIN) of this unit to "HIGH".
Turn off the equalizer and other such settings on the playback device.
Sound may be interrupted if the CPU load on the computer is too large.
Exit any unnecessary applications on the computer.
Rear panel
Settings
Cause / Solution
Cause / Solution
39
Index
Tips
Appendix
Page
Page
22
－
－
－
－
－
35
－
－
Advertisement
