Denon DA-10 Owner's Manual page 28

Contents Connections
6
Turn the input source select switch (INPUT) to USB-
DAC, and turn on the power of the unit.
When the unit power is turned on, the PC automatically finds and
0
connects to the unit.
7
Checking the installed driver.
A Click the "Start" button and click "Control Panel" on the PC.
The control panel setting list is displayed.
0
B Click the "Sound" icon.
The sound menu window is displayed.
0
C Check that there is a checkmark next to "Default Device" under in
"Digital Audio Interface" of the "Playback" tab.
When there is a checkmark for a different device, click DENON
0
USB Audio and "Set Default".
Front panel Side panel
Playback Settings
8
Checking audio output.
Outputs a TEST signal from the PC and checks the audio output
from the USB-DAC function.
A Select "Digital Audio Interface" and click "Properties".
Rear panel 28
Tips
The Digital Audio Interface Properties window is displayed.
0
Sound
Playback Recording
Communications
Sounds
Select a playback device below to modify Select a playback device below to modify its settings
Configure Configure
Index
Appendix
q
Set Default Set Default Properties