9.3 DISASSEMBLY/REASSEMBLY OF BASIC MACHINE OPTIONS
DISASSEMBLY/REASSEMBLY OF THE HORIZONTAL MAGNETIC/MICR
9.3.1
• Remove the casing as described above.
• From the front, lift the entire mechanism from the baseplate and rotate it partially so as to access the
connectors on the horizontal magnetic board (1).
• Detach the connectors of the cables connected to the horizontal magnetic board.
• Back off the two lock-screws (2) that fasten the assy to the structure of the machine and disassemble the
option.
XZAC4219-03
Figure 9-42 Machines with serial number 8.xxx.xxx
Service Manual
2
1
9-37