Table of Contents
Advertisement
Single Unit, Single
Rate Pedestal Charger
MGCH3J
Slide-on 500 mAh Standard
Capacity Battery
MGPA5B
1200 mAh High Capacity
Battery
MGPA5C
Deluxe All Leather Case
with metal riveted
construction and slide
on metal swivel for use
with standard capacity
battery.
MGHC5L
Deluxe All Leather Case for
use with high capacity battery
MGHC5M
Figure 1 - Options And Accessories
Dual Unit, Dual Rate
"Smart" 1 Hour Desktop Charger
MGCH3K
Speaker/Microphone
Has rotating detent clip
for fastening to pocket
or lapel.
MGAE1V
Antenna
PC Programming
MGNC3N-VHF
TQ 3375
Antenna
PC Programming Cable
MGNC3P-UHF
TQ 3376
TX DELAY
This option is used to eliminate Squelch Tail.
POWER SAVE MODE
The Power Save Feature is a battery saver feature, fol-
lowing are the three options:
On Time: This is the time that the battery save mode is
enabled and the Receiver is asleep. (Suggested setting 400
mS)
Off Time: This is the time that the battery save mode is
enabled and the Receiver is awake. (Suggested setting 150
mS)
Delay Time: This is the time it takes to resume the Power
Save Mode after the carrier drops out. (Suggest setting 5
Seconds)
Figure 2 - Controls And Indicators
LBI-38861C
CONTROLS AND INDICATORS
Operating controls, indicators, accessories socket and
antenna connections are all located on the top panel. The
monitor and PTT buttons are located on the left hand side of
the radio chassis. Figure 1 shows their location.
The radio battery pack securely latches in place at the
bottom of the radio and is locked in position by the battery
release switch.
CONTROLS
ANTENNA RECEPTACLE: Attaches the antenna to the
radio, 1/4 inch in UNEF
socket
ACCESSORY JACK:
Multipurpose 6-way jack,
used with optional speaker
microphone or VOX unit.
May also be used for an exter-
nal 8 ohm speaker or ear-
phone and programming.
3
Advertisement
Table of Contents
