Advertisement
Security Systems
Product
DVR 600 Series
2 Update procedure
To update the DVR 600 Series to the latest firmware, please refer to the Video recorder 600
Series Operation Manual, chapter 6.6.5 or follow instructions below:
1. Put firmware v2.0.6 via a PC on the root of a USB memory stick (file name: 600series.bin
[date 2012-10-12])
2. Insert the USB stick into the front USB connector of the DVR
3. Log on as "ADMINISTRATOR" in the local unit
4. Select Menu and go to the "System > Configuration" screen
5. Select Update firmware to upgrade the DVR software. In this case, the current DVR
settings and video will not be deleted or replaced during the update process.
6. Select OK to begin the update process or click Cancel to stop and exit. After the update
process is completed you have to press OK so that the system will automatically restart.
Alternative a firmware upgrade can be performed via the Web Client:
-
Open Internet Explorer and type on the address bar the network IP address of the unit
-
Log on by entering the User ID (default ADMINISTRATOR) and Password (default
000000)
-
Select the configuration mode by clicking on the "Configuration" button
-
Select 'System' and then 'Configuration'
-
Browse to the v2.0.6 firmware file name "600series.bin" (date 2012-10-12)
-
Press the "Update" button
Firmware will be automatically updated and unit will be restarted.
Document type
Release notes
Figure: Update firmware menu
Release #
SAP/Doc number
V2.0.6
Release date
2012.10.12
Page 2 of 6
Advertisement
