Lan Indicators - Fujitsu PRIMERGY CX2550 M1 Operating Manual

Starting up and operation
6.1.1.3

LAN indicators

Figure 4: LAN indicators
No Indicator
1 LAN
link/transfer
2 LAN speed
I
Depending on the settings in the BIOS, the standard LAN connector 1
may also be used as a Management LAN connector. You will find further
information in the "D3343 BIOS Setup Utility for FUJITSU Server
PRIMERGY CX2550 M1 Reference Manual".
42
Description
Steady green signal when a LAN connection exists.
Remains dark when no LAN connection exists.
For System LAN
Steady yellow signal in the event of a LAN transfer rate
of 1 Gbit/s
Steady green signal in the event of a LAN transfer rate
of 100 Mbit/s.
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
For Management LAN:
Steady yellow signal in the event of a LAN transfer rate
of 100 Mbit/s
Remains dark in the event of a LAN transfer rate of
10 Mbit/s.
Operating Manual
CX2550 M1