Table of Contents
Advertisement
Introduction
This manual explains how to install the EM3000 components (and connect a unit to a computer) to create
an access control system. This manual is divided into seven sections, referred to as steps:
Step 1: Lists those components that are supplied and not supplied. Refer to page 4.
Step 2: Provides EM3000 specification information such as system features, capacities, and
Step 3: Defines "Access Control" and explains how to plan for your system installation. Refer to
Step 4: Identifies the specific connections for each component. Refer to page 10.
Step 5: Outlines the proper sequence of events for powering up the system. Refer to page 21.
Step 6: Explains what you need to know about adding multiple EMCs and components to the
Step 7: Lists various trouble-shooting tips and FAQs, useful if the system is not performing
cable requirements and maximum lengths. Refer to page 5.
page 6.
system. Refer to page 25.
properly upon start-up. Refer to page 27.
3
Introduction
Doc 6001536, Rev C
Advertisement
Table of Contents
