Table of Contents
Advertisement
Select New Array Type screen
This screen describes the types of RAID volumes that can be created. Move the cursor to either the Create
Raid 1 Volume field or the Create Raid 0 Volume field, and then press Enter to display the Create New
Array screen.
Create New Array screen
Use the Create New Array screen to select the disk drives for the new array.
For a RAID 1 volume, choose one of the following options when adding the first disk:
•
To keep the existing data and migrate to a RAID 1 array, press M. Disk synchronization occurs.
CAUTION:
•
To overwrite existing data and create a new RAID 1 array, press D. No synchronization occurs.
Pressing D deletes the data on all disks in the array.
SAS BIOS configuration utility 12
Advertisement
Table of Contents
