Table of Contents
Advertisement
Completing the installation procedure
Verify that all cables are routed correctly and are not restricting other components or being pinched
1.
by them. For the correct cable routing, see the server documentation.
Connect peripheral devices to the server.
2.
Plug the AC power cord into the server.
3.
Plug the other end of the power cord into a grounded AC outlet.
4.
Power on any peripheral devices attached to the server.
5.
Power up the server.
6.
Install the adapter drivers. The drivers are available on the CD in the adapter kit or the HP website
7.
(http://www.hp.com). Instructions are provided with the driver files.
Installation procedure 8
Advertisement
Table of Contents
