Get Started; Charge The Built-In Battery; Turn On/Off - Philips TAS1108 User Manual

3 Get started

Always follow the instructions in this
chapter in sequence.
Charge the built-in
battery
The speaker is powered by a built-in
rechargeable battery.
Note
Fully charge the built-in battery before
using.
Connect the Type-C socket on the
speaker to an outlet (5V 1A) by
using the provided Type-C cable.
5V 1A
When the speaker is being charged，
the LED indicator turns red.
When the speaker is fully charged，
the LED indicator goes off.
4 EN
Caution
Risk of speaker damage! Make sure the
power supply voltage corresponds to the
voltage printed on the back or the
underside of the speaker.
Risk of electric shock! When unplug the
USB cable, always pull the plug from the
socket. Never pull the cable.
Use only a USB cable speci�ed by the
manufacturer or sold with this speaker.
Turn on/off
Press to turn the speaker on.
You will hear the prompt sound.
To turn the speaker off, press
You will hear the prompt sound.
Note
The speaker will turn off automatically
if there is no audio signal from
Bluetooth for 15 minutes.
again.