Switching To Single Cd Mode; Loading A Cd - Mercedes-Benz COMAND control panel Operator's Manual

Audio
Single CD operation

Switching to Single CD mode

Open the Single CD main menu
( page 51);
or
Load an audio CD into the COMAND
CD drive.

Loading a CD

Warning
In order to avoid distraction which could
lead to an accident, the driver should insert
CDs with the vehicle at a standstill and oper-
ate the audio system only when road, weath-
er and traffic conditions permit.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approximate-
ly 14 m) every second.
50
!
Do not attach labels of any type to the
CD. They may become detached and
damage the drive.
Your CD drive has been designed to
G
play CDs which correspond to the IEC
60908 standard. Therefore only CDs
not exceeding a thickness of 1.3 mm
can be used.
!
aa
If you insert thicker data carriers, e.g.
ones that have data on both sides (one
side with DVD data, the other side with
audio data), they cannot be ejected
and will damage the drive.
Do not play single-CDs (80 mm) with an
adapter. Only use 12 cm diameter CDs.
i
The COMAND CD drive may not be able
to play audio CDs with copy protection.