Table of Contents
Advertisement
Troubleshooting
WARNING! To Reduce the Risk of Electrical Shock or Injury From Moving Parts, Unplug
Before Servicing or Cleaning.
CAUTION! To reduce the risk of electric shock, do not handle plug or appliance with wet hands.
PROBLEM
Vacuum won't turn on
Vacuum won't pick up or
low suction
Dust escaping from
vacuum
Any other service should be performed by an Authorized Riccar Retailer.
Key Replacement Parts
• Genuine HEPA Media Vacuum Bags: RMH-6
• Genuine Vacuum Belts: R20B-2 (models R20S and R20D)
• Genuine Filters: RF20UP (model R20UP)
RF20DP (models R20D and R20P)
RF20S (model R20S)
For Best Performance
• Keep your vacuum clean and in good operating condition.
• Change vacuum bags once a month or when the full bag light is illuminated to maximize
cleaning performance.
• Always use genuine Riccar vacuum bags and replacement parts. Use of other products may
result in poor cleaning performance, potential vacuum cleaner damage and may void vacuum
warranty. Genuine products are designed for maximum cleaning performance.
• Have your vacuum checked annually by your Authorized Riccar Retailer.
• Store your vacuum carefully in a dry area.
• For optimum cleaning performance and safety, follow your owner's manual instructions.
POSSIBLE REASON
• Power cord not firmly
• Blown fuse or tripped
• Needs service
• Vacuum bag full
• Clogged filter
• Hose clogged
• Worn brushes
• Bag compartment cover
• Filters not installed
To locate your nearest Authorized Riccar Retailer, visit our website
at www.Riccar.com or call 888-6-RICCAR.
plugged in
breaker
is not installed properly.
correctly
21
PRoBleM solVInG GUIDe
POSSIBLE SOLUTION
• Plug unit in firmly.
• Check house fuse or
breaker. Replace fuse /
reset breaker.
• Take to an Authorized
Riccar Retailer
• Replace bag.
• Replace filters.
• Remove obstacle.
• Replace brush strips.
• Attach the bag
compartment cover.
• Review filter installation
(pages 15-16).
Hide quick links:
Advertisement
Table of Contents
