oPeRAtIon
Using the Carpet/Floor Selector
(models R20D, R20P and R20UP)
To Vacuum Carpet:
CARPET
For carpet cleaning, slide the
Carpet/Floor Selector toward the
back of the nozzle so that it reads
"Carpet" (Fig. 1).
Carpet
To Vacuum Hard Surfaces and
Use Tools:
Fig. 1
For cleaning bare floors or using tools, slide
the Carpet/Floor Selector toward the front
of the nozzle so that it reads "Floor & Tools".
This prevents the brushroll from spinning and
potentially damaging your floor (Fig. 2).
FLOOR &
TOOLS
Edge Cleaning
The edge cleaning feature provides improved
Floor & Tools
cleaning of carpets near walls and stationary
furniture. For maximum edge cleaning, place
the right side of the nozzle against the wall
Fig. 2
or furniture.
Automatic Carpet Height Adjustment
Your vacuum cleaner is designed with an
automatic self-adjusting nozzle. No manual
adjustments are required. The height of the
nozzle automatically adjusts to the carpet
pile height. This self-adjusting feature allows
the nozzle to float evenly over all carpet
pile surfaces.
8