Silvercrest RT2000 Operating And Safety Instructions Manual page 19

the adapter (14) are aligned to the
grooves (13) in the valve.
Then slide the corresponding adapter on
□
the valve until it latches into place.
The RA and RAV adapters are produced to
have a pretension in order to provide a bet-
terfit.Ifnecessary,useascrewdriverduring
assembly in order to open the corresponding
adapter a little in the area of the screw.
Afterfittingtherelevantadapteronthe
□
valvebody,fixtheadapterinplaceusing
the relevant screw and nut supplied (see
Fig. 2, 3).
Fixthevalveadapterfirmly.
□
In the case of RAV valves, the plunger exten-
sion(15)mustbefitonthevalvepin(seeFig.
2) prior to assembly.
Fit the device on the valve or adapter.
The device latches audibly�
Gi
21