Introduction; Specifications - Banner American Easy-lam II Operating Instructions Manual

Congratulations on your purchase of the Easy-Lam II Roll Laminator. This unit is designed
to provide years of trouble-free service.
The Easy-Lam II will accept rolls of laminating film up to 27" wide in both 1.5 and 3 mil
thicknesses. Paper and card stock up to 1/16" (1.6mm) thick may be laminated without
adjusting the feed rollers.
The Easy-Lam II will accept 5 mil film if the machine was purchased with the 5 mil switch or
variable speed only!
Your Easy-Lam II is preset at the factory for most applications, so any adjustments should be
minor. A thermometer provides continual indication of the heat shoe temperature, which may
be adjusted as needed.
Plastic Width
Plastic Thickness
Maximum Roll Length
Speed
Net Weight
Power Requirements

INTRODUCTION

SPECIFICATIONS

Up to 27" (68.6cm)
1.5 mil and 3 mil (37 and 75 micron).
5 mil (125 micron) with 5 mil option switch
only.
1.5 mil – 1,000 feet (304.8 meters)
3 mil – 500 feet (152.4 meters)
5 mil – 250 feet (76.2 meters)
5 feet per minute (1.64m/minute)
91 lbs (41 kg)
120VAC, 60Hz, 1840 watts (UL),
220VAC available
5