Table of Contents
Advertisement
Operational Principles
The operation of the Vi2 will be obvious to users familiar with the Vi4 or 6 consoles, the Vi2 is in fact
identical to the right-hand two bays of the standard Vi4 or 6 surface, missing only the 2 or 3 Input bays
to the left of the master section. Thus there is only one bay of 8 faders available for input channel control,
instead of the 3 or 4 on the larger consoles.
The picture below illustrates the various methods of assigning Input channels to this right-hand bank of
faders (blue rectangles), as well as how Output channels can be assigned to these faders (red rectangles).
F
E
D
The 8 Master section faders
assignments for these faders are controlled by a set of Output Fader Page buttons
and can be customised using the associated Fader Page Setup button.
The 8 Input section faders
the Local Rack being used has the DSP channel upgrade or not (64 inputs without the upgrade).
Page 6
B
A
A
are dedicated to control of VCAs and Bus masters, as on the Vi4 and 6. The
C
are available for control of up to 96 input channels, depending on whether
Soundcraft Vi2™ User Guide Supplement 0210 BD10.947003 Rev 0
C
B
within this section,
Advertisement
Table of Contents
