Propeller Replacement; Troubleshooting - e-motion electric pleasure boat Owner's Instruction Manual

9.3 Propeller replacement

Before you do anything with the propeller, ensure that the cables to the battery are
disconnected.
You can remove the propeller simply by loosening and removing the nuts using a
special key included in the scope of supply. It is necessary to hold the propeller by hands
while loosening the nuts, so that the propeller would not rotate. Never attempt to loosen
the nut with a hammer or a similar tool, as this may cause damage to the lock nut and the
shaft of the motor. After removing the lock nut you can remove the propeller.
When re-installing the propeller into its place, align the slots and grooves of the
propeller and the shaft, otherwise the propeller won't be locked in place.

9.4 Troubleshooting.

Problem
Loss of speed
Engine noise and vibrations
Possible cause and Solution
1. Check for clogging elements (algae, lines, etc.)
and clean the propeller off them.
2. Check battery power condition.
3. Check the reliability of contacts at
accumulator battery terminals.
4. Check for clogging elements (algae, lines, etc.)
and clean the propeller of them.
5. Check the propeller for damage.
6. The propeller shaft may be bent. Remove the
propeller and start the engine, observing the
propeller shaft. If the shaft is bent, contact the
boat seller.
15