Cisco Aironet 1700 Deployment Manual page 76

Figure 99 Ethernet Uplink Port to Controller is Labeled PoE and Auxiliary Port is Labeled AUX
Table 7 2700 Power Requirements
Description
2700 – Out of the Box
PoE+802.3at
2700 – Out of the Box (7.6
code)
2700 – Out of the Box
(8.0.x.x code)
2700 – Out of the Box
(8.0MR or 8.1)
PoE+802.3af
a. This is the power required at the PSE, which is a switch or injector.
The auxiliary port is not manageable in software. So, if you do not want the auxiliary port enabled, you
Note
need to limit PoE to 15.4 W. This will be fixed in the next release 8.0MR or 8.1.
Figure 100 AUX port is active when PoE status is at FULL power or when a local power supply is used
Cisco Aironet Series 2700 Access Point
AP Functionality
4x4:3 on 5G & 3x4:3 on 2.4G
Auxiliary Ethernet Port enabled
Auxiliary Ethernet Port disabled
2x2:2 on 5G & 2x2:2 on 2.4G
Auxiliary Ethernet Port disabled
3x3:3 on 5G & 3x3:3 on 2.4G
Auxiliary Ethernet Port enabled
3x3:3 on 5G & 3x3:3 on 2.4G
Cisco Aironet Series 1700/2700/3700 Access Point Deployment Guide
7
PoE
a
Budget
(Watts) 802.3af E-PoE
16.1 Not Available Available
Available
15.4 Available NA
15.4 Available NA
15.4 Available NA
802.3at
PoE+
PWRINJ4
NA
NA
NA