Table of Contents
Advertisement
L
W
™
C
IVING
ATERS
OUNTERTOP
STEP 1: CUT THE TUBE
SQUARE
Cut the tube square and remove
burrs and sharp edges. Ensure that
the outside diameter is free from
score marks. For soft or thin-walled
plastic tubing we recommend the use
of a tube insert.
STEP 4: TO
DISCONNECT
To disconnect, ensure that the
system is depressurized, push the
collet square against the fitting. With
the collet held in this position the
tube can be removed.
Page
1 5
o f
2 0
S
M
YSTEM
ANUAL
STEP 2: PUSH IN TO
TUBE STOP
Push the tube into the fitting and
up to the tube stop.
STEP 3: PULL TO
CHECK SECURE
Pull on the tube to check that it is
secure. Test the system before
use.
Advertisement
Table of Contents
