Table of Contents
Advertisement
•
Threading the Machine
Janome 712T Instruction Manual
q
e
w
r
t
y
q
w
www.aaasewing.com
e
r
t
y
Raise the thread take-up lever to its highest position by turning the
handwheel towards you. Raise the presser foot with the presser foot
lifter and pass the thread in the order from
q
Draw the thread into the thread guide using both hands.
w
While holding the thread near the spool, draw the thread down
into the tension area and then around the check spring holder.
e
Firmly draw the thread from right to left over the take-up lever and
down into the take-up lever eye.
r
Then draw the thread down and slip it into the lower thread guide.
t
Draw the thread down and slip it into the needle bar thread guide
on the left.
y
Thread the needle eye from front to back.
NOTE:
You may want to cut the end of the thread with sharp
scissors for easier needle threading.
Janome Treadle Machine
q
y
to
.
712T Owners Manual/ User Guide
11
Advertisement
Table of Contents
