Winding The Bobbin - Janome 712T Instruction Manual

•

Winding the Bobbin

Janome 712T Instruction Manual
Stop motion
knob
q
i
e
Bobbin winder
thread guide
w
Draw the thread from the spool.
e
Guide the thread around the bobbin winder thread guide.
www.aaasewing.com
q
Turn the stop motion
knob counterclockwise to
disengage clutch.
r
r
t
t
y
y
u
u
i
712T Owners Manual/ User Guide
Janome Treadle Machine
Insert the thread through the hole in
the bobbin from inside to outside as
shown.
Put the bobbin on the bobbin winder
spindle, and push it to the right.
While holding the free end of the
thread with your hand, pedal the
machine. Stop the machine when the
bobbin has made a few turns, and cut
the thread close to the hole in the
bobbin.
Pedal the machine and wind the
thread until the bobbin stops. Move
the bobbin winder spindle to its
original position (left), and cut the
thread.
Turn the stop motion knob clockwise
to engage clutch.
* The machine will not sew until the
stop motion knob is tightened.
9