Table of Contents
Advertisement
22
HOW TO USE
Control Panel Features
* Depending on the model, some of the
following functions may not be available.
LED Display
Indicator
Control
Button
Ice Type
Select Crushed Ice or Cubed Ice by pressing
the ICE TYPE button repeatedly to choose the
selection desired. The Crushed Ice or Cubed Ice
icon will light up to indicate your selection.
Selecting this icon indicates that
cubed ice will be dispensed when the
dispenser pad is activated.
Selecting this icon indicates that
crushed ice will be dispensed when
the dispenser pad is activated.
To dispense water or ice, gently push your cup
against the dispenser pad (see page 25).
NOTE: Hold your cup in place for a couple of
seconds after dispensing ice or water so the
last few drops go in your cup instead of on the
floor.
Temperature
The Refrigerator Temp. Control ranges
from 33°F to 46°F (0°C to 8°C). Press the
refrigerator temp. button to cycle through
the available temperature settings one
increment at a time.
The Freezer Temp. Control range is from
-6°F to 8°F (-21°C to -13°C). Press the
freezer temp. button to cycle through the
available temperature settings one incre-
ment at a time.
NOTE: When changing control settings, wait
24 hours before making additional adjustments.
The controls are set correctly when milk or juice
is as cold as you would like and when ice cream
is firm. If the temperature in either compart-
ment is too cold or too warm, change the set-
ting one increment at a time. Wait 24 hours for
the change to stabilize before adjusting again.
Temperature Mode Switch Function
(°F <->°C)
If you want to convert °F to °C or vice versa,
press and hold the Freezer Temp. and Refrigera-
tor Temp. buttons at the same time for approxi-
mately five seconds.
Advertisement
Table of Contents
