IKEA NUTID OV9 Instructions page 4

GB
NUTID ELECTRONIC TIMER INSTRUCTIONS
"Pyrolysis" function
1. Turn the knob to the Pyrolysis automatic cleaning function and for 2 seconds the display will show
the selector will automatically set a minimum duration of
2. To modify the automatic cleaning cycle duration, use the "+" "-" buttons. The maximum programme duration is 3 hours.
To set the end of the pyrolysis cycle, proceed as follows:
1. Press the "set" button to set the end of pyrolysis duration.
The indicator next to the symbol lights up.
2. Set the end of the pyrolysis cycle with the "+" "-" buttons.
3. Press the "ok" button to confirm the end of pyrolysis duration.
The oven will switch on automatically at the end of the pyrolysis cycle minus the cycle duration (previously set).
The indicators above the symbols light up in succession.
4. To increase the pyrolysis duration, press the "set" button and set the new cycle duration with the "+" button.
5. Confirm with the "ok" button.
At the end of the set time, a buzzer sounds and the display will show
6. Press "ok" to stop the buzzer.
7. Turn the knob to " ": the time will reappear on the display.
Timer
The timer can only be used when the oven is not in use and allows a maximum time of 6 hours to be set.
To set the timer:
1. Leave knob turned to " ". The display shows the time of the day.
2. Press the "set" button. the indicator lights up next to the symbol
Use the "-" or "+" buttons to set the required time.
3. Press the "ok" button to confirm the selection.
At the end of the set time:
A buzzer sounds and flashes on the display.
Press the "ok" button: the buzzer stops. The time of day reappears on the display.
Child Safety (Lock)
1. After turning the knob to " ", press the "-" and "+" buttons together for 3 seconds.
Note:
Activation of the LOCK function is indicated by an acoustic signal, whereas the symbol
Once set, the display will continue to indicate the time.
2. The oven functions cannot be used after Safety Lock activation.
3. To deactivate the lock, repeat the sequence described in point 1.
Cln
1:30 .
.
.
appears on the display.
(cleaning);