Tools; Osd Setting; Auto Standby - THOMSON THT504+ User Manual

Parental Rating: Choose between: Off, 4 years and up to 18 years. Channels with a parental
rating above the chosen age will be protected with a PIN code (if available in
your local broadcast.)
New Password: Enter your new PIN code (4 digits) here.
Confirm Password: Re-enter your PIN code here to confirm.

7.3.6 osD setting

This menu allows you to change settings for: OSD Timeout and OSD Transparency.
OSD Timeout: Sets the duration time of on screen banners and messages remove. The
range is 1~10 seconds or Always On.
OSD Transparency: To set the OSD transparency from Off ~ 40% with 10% steps.
Load Default OSD Setting:
Press ok to clear all OSD settings and reset to default values.

7.3.7 Auto standby

Auto Standby is a new feature that helps you reducing power consumption. When set to 30Min/1
Hour/2 Hours or 3 Hours, the receiver will switch to standby if it doesn't receive any commands
during this time. Set Auto Standby to Off to deactivate the automatic standby function.

7.4 Tools

Press Menu in viewing mode to enter the Main Menu.
Select the Tools submenu with pq and press ok or u to enter.
Use pq to highlight the submenu of choice and press ok proceed.
Press eXiT to leave.
7.4.1 information
This submenu shows receiver specific information such as hardware version and software version.
It also displays our web address www.thomsonstb.net. Please have the Information screen on
hand when you call our hotline. The person who answers your call might ask for the information
given in this screen.
7.4.2 Load factory settings
This option allows you to reset the receiver to factory settings, which clear all stored channels.
By resetting your receiver to factory default, all your settings and stored
Warning:
channels will be permanently deleted. Please use this option with care.
Use pq to select Load Factory Settings in the Tools menu and press ok. You are asked to input
your PIN code.
Input the correct PIN code using the 0~9 (DefAuLT Pin: 1234). A confirmation window is displayed.
Select Yes to return to factory settings. Select No to cancel.
Press eXiT to leave.
P17
MAIN MENU