Setting Channels To Your Preference; Auto Search; Manual Setting For Each Channel - Sharp Aquos LC-32A33X Operation Manual

Watching TV

Setting channels to your preference

You can run the auto search procedure again at any
time by accessing the Setup menu and Programme
Setup. Channels can be tuned automatically or
manually.

Auto search

You can also automatically search by performing
the procedure below. This is the same function as
programme auto search in auto installation.
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Programme Setup", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 27 for setting a password.
[ Setup ... Programme Setup ]
MENU
Setup
Auto Installation
Programme Setup
Child Lock
Input Skip
Input Label
Position
WSS
4:3 Mode
Standby Mode
Language
Text Language
Reset
Press a / b to select "Auto Search", and then
4
press ENTER.
Press a / b to select "Yes", and then press
5
ENTER.
Press a / b to select the desired sound
system, and then press ENTER.
"Search is completed." is displayed. Press
MENU to exit.
20
32A33X_en_c.indd 20 32A33X_en_c.indd 20

Manual setting for each channel

You can set some channel items manually. They are
Search, Fine (TV frequency), Colour System, Sound
System and Skip.
Option
Programme Setup "Manual Adjust" menu
You can select one of the following settings.
1 Search (See page 21.)
2 Fine (See page 21.)
3 Colour system (See page 21.)
4 Sound system (See page 21.)
5 Skip (See page 22.)
Press MENU and the MENU screen displays.
1
Press c / d to select "Setup".
2
Press a / b to select "Programme Setup", and
3
then press ENTER.
If you have already set the password, enter it
here.
• See page 27 for setting a password.
Press a / b to select "Manual Adjust", and
4
then press ENTER.
Press a / b to select "Yes", and then press
5
ENTER.
01 SAT.1 02 PR07 03 KABEL
2008-1-4 20:14:09 2008-1-4 20:14:09