Supplying Power Using A Wall Outlet (Wall Socket); Removing The Battery Pack - Sony ILCA-77M2 How To Use Manual

conditions:
The battery pack is used at an ambient temperature of 25°C (77°F).
Using the lens DT 16-50mm F2.8 SSM
Using Sony Memory Stick PRO Duo media (sold separately)
[Viewfinder Bright.]: [Manual][±0]
[Monitor Brightness]: [Manual][±0]
The number for "Shooting (still images)" is based on the CIPA standard, and is for shooting under the
following conditions (CIPA: Camera & Imaging Products Association):
Focus Mode: [Single-shot AF]
One picture is taken every 30 seconds.
The power is turned on and off once every ten times.
The number for "Actual shooting (movies)" is based on the CIPA standard, and is for shooting under
the following conditions:
The image quality is set to 60i 17M (FH) .
Actual shooting (movies): Battery life based on repeated shooting, zooming, shooting stand-by, turning
on/off, etc.
Continuous movie shooting: Battery life based on non-stop shooting until the limit (29 minutes) has been
reached, and then continued by pressing the MOVIE button again. Other functions, such as zooming, are
not used.
If the remaining battery is not displayed, press the DISP (Display Setting).
[17] How to Use

Supplying power using a wall outlet (wall socket)

Power can be supplied to the camera during shooting/playback using an AC adaptor AC-PW10AM (sold
separately).
1. To supply power to the camera during shooting/playback, connect the camera and the AC adaptor
AC-PW10AM (sold separately) and plug the AC adaptor to a wall outlet (wall socket).
[18] How to Use

Removing the battery pack

How to remove the battery pack
1. Make sure that the access lamp is not lit, and turn off the camera.
2. Slide lock lever (A) and remove the battery pack.
Preparing the camera
Preparing the camera
Charging the battery pack
Charging the battery pack