Af Micro Adj - Sony ILCA-77M2 How To Use Manual

between pressing the shutter button halfway down and locking the focus, the flash is raised and released
to allow the camera to focus more easily.
1. MENU → (Camera Settings) → [
Menu item details
Auto (default setting):
Uses the AF illuminator.
Off:
Does not use the AF illuminator.
Note
You cannot use [
In movie mode
In [Sweep Panorama] mode
When [Focus Mode] is set to [Continuous AF].
When [Scene Selection] is set to [Landscape], [Sports Action] or [Night Scene].
When [Focus Area] is set to [Wide] or [Zone], the AF range finder frame is indicated by a dotted line.
The AF illuminator emits a very bright light. Although there is no health hazard, do not look directly
into the AF illuminator at close range.
[83] How to Use

AF Micro Adj.

Allows you to adjust and register an autofocused position for each lens.
1. Select MENU →
2. Select [AF Adjustment Set.] → [On].
3. [amount] → desired value.
You can select a value between −20 and +20. Selecting a positive value shifts the autofocused
position away from the product. Selecting a negative value shifts the autofocused position closer
to the product.
Note
It is recommended that you adjust the position under actual shooting conditions.
When you attach a lens for which you have already registered a value, the registered value appears
on the screen. [±0] appears for lenses for which a value has not yet been registered.
If [−] is displayed as the value, then a total of 30 lenses have been registered and no new lens can be
registered. To register a new lens, attach a lens for which the registration can be erased, and set its
value to [±0], or reset the values of all the lenses using [Clear].
AF Illuminator] in the following situations:
Using shooting functions
(Custom Settings) → [AF Micro Adj.].
AF Illuminator] → desired setting.
Adjusting the focus