Supplying Power From A Wall Outlet (Wall Socket) - Sony ILCE-7RM4A Help Manual

Interchangeable lens digital camera
Hide thumbs Also See for ILCE-7RM4A:
Table of Contents

Advertisement

Help Guide
Interchangeable Lens Digital Camera
ILCE-7RM4A
α7RIV

Supplying power from a wall outlet (wall socket)

Use an AC adaptor, etc. to shoot and play back images while power is supplied from a wall outlet (wall socket). This
conserves the camera's battery power.
Insert the battery pack into the camera.
1
Connect the camera to the wall outlet (wall socket) with a USB cable and an AC adaptor, etc.
2
Note
The camera will not activate if there is no remaining battery. Insert a sufficiently charged battery pack into the camera.
If you use the camera while power is being supplied from a wall outlet (wall socket), make sure that the icon that shows that
powering via USB is in progress (
Do not remove the battery pack while power is supplied from a wall outlet (wall socket). If you remove the battery pack, the
camera will be turned off.
Do not remove the battery pack while the access lamp is lit. The data in the memory card may be damaged.
As long as the power is on, the battery pack will not be charged even if the camera is connected to the AC Adaptor, etc.
Under certain conditions, power may be supplied from the battery pack supplementarily even if you are using the AC adaptor, etc.
Do not remove the USB cable while power is supplied from a wall outlet (wall socket). Before you remove the USB cable, turn off
the camera.
Depending on the camera and battery temperature, the continuous recording time may be shortened while power is supplied
from a wall outlet (wall socket).
When using a mobile charger as a power source, confirm that it is fully charged before use. Also, be careful of the remaining
power on the mobile charger during use.
) is displayed on the monitor.
5-027-206-12(1) Copyright 2021 Sony Corporation
63

Advertisement

Table of Contents
loading

Table of Contents